
Gretsch GB4163S 7x13inch Brooklyn Chrome Over Steel Snare Drum
February 24, 2025Gretsch Brooklyn GB E8266 6 Piece Shell Pack, Grey Oyster
Gretsch Brooklyn 6Pc 18×22 Grey Oyster Drum Kit GB-E8256-301 (Shell Pack Only)
Shell Pack. 22″x18″BD, 12″x8″TT, 10″x7″TT, 16″x14″FT, 14″x14″FT, 14″x5.5″ S
Brooklyn, New York and Gretsch Drums share an inseparable legacy that is reflected in the Gretsch Brooklyn Series. Proudly hand-crafted in Gretsch’s Ridgeland, SC, USA factory, Gretsch Brooklyn produces a sound that is immediately recognizable, yet distinctively reinvented. Brooklyn drums feature 6-ply North American maple/poplar shells and are made slightly thicker than Gretsch’s USA Custom Drums and have a 30-degree bearing edge. Shell interiors are finished with classic Gretsch Silver Sealer. Each shell comes with a distinctive Brooklyn internal shell label that identifies the drum shell model number and serial number.
Rp86.590.000
Related products
-
Gretsch G4160HB 14×5 USA Custom Hammered Chrome Over Brass Snare Drum
Rp12.210.000The 14×5 Gretsch USA Custom Hammered Chrome Over Brass Snare Drum has a brass shell with 45-degree bearing edges. This Gretsch snare drum features die cast hoops, 8 double ended lugs, lightning throw off, 42-strand snare wires, and a Gretsch logo PermaTone coated drumhead. This snare drum has a Chrome over Brass finish, Gretsch Round badge, and chrome hardware.
-
KLARK TEKNIK DN200 V2 Channel Active DI Box with Extended Dynamic Ran
Rp3.355.000The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN200 offers a very wide dynamic range, and only requires the -20 dB pad when connecting directly to instrument amplifier outputs or other very high-level signal sources.
DN200 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is protected by tough silicone rubber corners