Bespeco XTRA800L20 8 Inputs 20 meters snake cable
November 21, 2024
TC ELECTRONIC SENTRY NOISE GATE Multiband Noise-Gating Pedal with Hard-Gate Mode
November 21, 2024
Bespeco SHG3 LOCKING TRIPLE STAND FOR BASS AND GUITAR
BESPECO SHG3 LOCKING TRIPLE STAND FOR BASS AND GUITAR
Attention to quality and essential design: these are the main features of the ‘StandHard Series’.
All models in this series are made in epoxy-powder coated C40 steel; all parts are finished with extreme care.
• Universal triple guitar stand with ABS safety lock bar
• All contact parts between instrument and stand are EVA coated
Height min 70 – max 95 cm
Spread 53 cm
Weight 1,4 Kg
Master carton (pcs) 6
Volume (cbm) 0,095
Brand
Bespeco
Related products
-
Gretsch Snare G4164HB USA Metal Hammered Chrome
Gretsch G4164HB USA Metal Snare
Hammered Chrome Over Brass
14″ x 6.5″
1,2mm Brass Shell
Lightning Throw-Off
Snap-in Key holder -
Gretsch G4168HB USA Custom Hammered Chrome Over Brass 6×13″ 6-Lug Snare Drum
The Hammered Chrome over Brass snare drum features a large-hammered shell to produce a very distinctive, albeit slightly drier sound than our standard Chrome over Brass snare shell. Additional features include Lightning throw-off, ‘Snap-In’ key holder and 42-Strand snare wire (20-strands on 13″ snare).
-
KLARK TEKNIK DN200 V2 Channel Active DI Box with Extended Dynamic Ran
The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN200 offers a very wide dynamic range, and only requires the -20 dB pad when connecting directly to instrument amplifier outputs or other very high-level signal sources.
DN200 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is protected by tough silicone rubber corners
