-
KLARK TEKNIK DF1000 Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression Processor
Rp3.476.000Klark Teknik DF1000 ( 1 pcs )
Ultra-Fast and Fully Automatic Dual-Channel Feedback Suppression ProcessorDual-channel feedback suppression processor designed for fully automatic and zero-configuration setup
Offers up to 10 dB increase in system gain
Instantly detects and stops acoustic feedback. Highly effective with both speech and music
Ultra-fast and highly accurate DSP selects and applies up to 32 filters per channel
Two fully independent audio channels to process stereo or separate zone signals
Extremely narrow filters (up to 1/30th octave) to retain overall signal integrity
Front panel control featuring suppression and filter reset buttons
Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors
Auto-ranging universal switch-mode power supply
1-Year Warranty Program*
Designed and engineered in the U.K. -
KLARK TEKNIK DI 10A Active DI Box with Midas Transformer, Extended Dynamic Range
Rp1.144.000Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 10A PRO DI ACTIVE offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 10A is ideal for interfacing keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. The DI 10A is powered by +48 V phantom power with a 9 V battery backup, which automatically allows the device to function should phantom power fail, or be unavailable. Equipped with a switchable input attenuator, DI 10A easily accommodates instruments, line, and even loudspeaker level signals – and thanks to its extremely low noise input circuit topology (-112 dBu), DI 10A provides extended dynamic range, making it the perfect choice for professional audio and multimedia applications.
Active DI Box for general purpose and multimedia applications
Custom-built Midas transformer for highest signal integrity
High headroom design offers superior sound quality
Powered from console +48 V phantom or internal battery (not included)
Automatic switchover to battery if phantom power fails
Matches the level and impedance with unity gain without loading the source
Switchable input attenuation for guitar, line and speaker levels
High quality Neutrik* XLR and high impedance 1/4″ TRS connectors
Earth Lift switch eliminates ground loop problems
Fully transformer-isolated design ensures electrical separation
Ultra-low noise and ultra-linear system for highest signal integrity
Aluminium extrusion casing with protective rubber corners
Compact and rugged design
1-Year Warranty Program*
Designed and engineered in the U.K.
-
KLARK TEKNIK DI 10P Passive DI Box with Stereo Input / Summed Mono Output, Midas Transformer
Rp957.000Klark Teknik DI 10P ( 1 pcs )
Passive DI Box with Stereo Input / Summed Mono Output, Midas Transformer and Extended Dynamic RangePassive DI Box with stereo input and summed mono output
Custom-built Midas transformer for highest signal integrity
High headroom design offers superior sound quality
Passive design does not require any power supply
Stereo input on 1/8″ TRS and RCA connectors
Fully adjustable level control for both channels
High quality Neutrik* XLR connector
Earth Lift switch eliminates ground loop problems
Fully transformer-isolated design ensures electrical separation
Ultra-low noise and ultra-linear system for highest signal integrity
Aluminium extrusion casing with protective rubber corners
Compact and rugged design
1-Year Warranty Program*
Designed and engineered in the U.K. -
KLARK TEKNIK DI 22P Passive Stereo DI Box with Midas Transformers and Extended Dynamic Range
Rp1.353.000Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 22P PRO DI AV 2 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 22P combines many of the outstanding features of the DI 20P and DI 10P direct boxes into one powerful tool that should be in every audio engineers kit. The extremely versatile DI 22P accepts dual instrument, line and speaker levels, plus also accommodates MP3, CD players, keyboard or drum submixers, and a variety of other stereo sources, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. A passive device, the DI 22P does not require any form of external power to complete its mission. Equipped with custom-built MIDAS transformers and switchable input Pads, the DI 22P is the perfect choice for premium-grade professional audio and multimedia applications.
Passive Stereo DI Box for general purpose and multimedia applications
Custom-built Midas transformers for highest signal integrity
High headroom design offers superior sound quality
Passive design does not require any power supply
Stereo input on 1/4″, 1/8″ TRS and RCA connectors
Switchable input attenuation for guitar, line and speaker levels
High quality Neutrik* XLR connectors
Earth Lift switches for input and output eliminate ground loop problems
Fully transformer-isolated design ensures electrical separation
Ultra-low noise and ultra-linear system for highest signal integrity
Aluminium extrusion casing with protective rubber corners
Compact and rugged design
1-Year Warranty Program*
Designed and engineered in the U.K.
-
KLARK TEKNIK DN100 Active DI Box with Extended Dynamic Range
Rp1.441.000The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.
DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve.
Active DI box with high-headroom design and +48 V phantom power for extended dynamic range
Fully transformer-isolated design ensures electrical separation between PA and stage equipment
Balanced line input on Neutrik* XLR and high impedance input and link output on 1/4″ TRS connectors
20 dB input pad and earth lift switches
Aluminium extrusion casing with protective rubber corners
Compact and rugged design
-
KLARK TEKNIK DN200 V2 Channel Active DI Box with Extended Dynamic Ran
Rp3.355.000The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN200 offers a very wide dynamic range, and only requires the -20 dB pad when connecting directly to instrument amplifier outputs or other very high-level signal sources.
DN200 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is protected by tough silicone rubber corners
-
KLARK TEKNIK DS 20 Passive 1-In / 2-Out Signal Splitter with Midas Transformer
Rp869.000Klark Teknik DS 20 ( 1 pcs )
Passive 1-In / 2-Out Signal Splitter with Midas Transformer and Extended Dynamic RangeLine level splitter sends single input signal to 2 outputs
Custom-built Midas transformer for highest signal integrity
High headroom design offers superior sound quality
Passive design does not require any power supply
High quality Neutrik* XLR connectors
Earth Lift switches for each output eliminates ground loop problems
Fully transformer-isolated design ensures electrical separation
Ultra-low noise and ultra-linear system for highest signal integrity
Aluminium extrusion casing with protective rubber corners
Compact and rugged design
1-Year Warranty Program*
Designed and engineered in the U.K. -
KLARK TEKNIK DS 50 Passive 1-In / 5-Out Signal Splitter with Extended Dynamic Range
Rp1.342.000Building on KLARK TEKNIK’s storied legacy of highest-quality signal processing devices, the DS 50 PRO SPLITTER 5 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DS 50 is ideal for routing balanced XLR signals to as many as 5 discrete destinations, including FOH and monitor consoles, active monitor loudspeakers, broadcast mixers, and more. A passive device, the DS 50 does not require any form of external power, making it the perfect solution for a wide range of professional audio and multimedia applications.
Line level splitter sends single input signal to 5 outputs
High headroom design offers superior sound quality
Passive design does not require any power supply
High quality Neutrik* XLR connectors
Ultra-low noise and ultra-linear system for highest signal integrity
Aluminium extrusion casing with protective rubber corners
Compact and rugged desig
-
KLARK TEKNIK DW 20BR Bluetooth Wireless Stereo Receiver for Stereo Audio Broadcasting
Rp1.727.000The AIR LINK DW 20BR Bluetooth Wireless Stereo Receiver brings the convenience of high-performance audio-streaming to any installed or portable sound system, making it ideal for hospitality and event spaces, as well as retail, home audio, and much more. Featuring a maximum wireless range of 100 feet (30 m), DW 20BR is easy to use and utilises premium-grade Neutrik balanced XLR and unbalanced 1/4″ TRS connectors to cover a wide range of audio applications.
Stereo receiver to wirelessly stream Bluetooth* to any audio system
Perfect for hospitality and event spaces, retail and home audio, etc.
High headroom design offers superior sound quality
Maximum wireless range 100 feet (30 m)
External, articulating antenna ensures optimum transmission and reception
Aluminium extrusion casing with protective rubber corners
Floor and wall mount brackets for fixed installation (included)
High quality Neutrik* XLR and 1/4″ TRS connectors
Compact and rugged design
1-Year Warranty Program*
-
KLARK TEKNIK EQP-KT Classic Tube Equaliser with Switchable Frequency Selection
Rp5.709.000If ever there is an official “Audio Technology Hall of Fame”, it will definitely include a shrine to the legendary Pultec EQP-1A. We pay homage to this audio-processing pioneer that has graced so many recordings, with our EQP-KT Classic Tube Equaliser. And while vintage Pultec units are extremely rare and expensive, the EQP-KT is amazingly affordable – and designed for the 21st Century. Mastering quality equalisation, at a price point that makes the EQP-KT equally at home in your studio – and your live rack!
Single-channel, two-band equaliser based on the classic Pultec* EQP-1A
Class A, all discrete circuitry for highest signal integrity
Premium selection 12AX7 and 12AU7 tubes
Custom-built Midas input and output transformers
Switchable frequency selectors with up to 7 frequency points
Independent boost and cut controls provide immense creative potential
Variable bandwidth control for wide sound sculpting
Inductor based equaliser section
Bypass feature allows for A/B comparison
Transformer balanced inputs and outputs on Neutrik* XLR connectors
Rugged 2U rackmount chassis for durability in portable applications
Auto-ranging universal switch-mode power supply
1-Year Warranty Program*
Designed and engineered in the U.K.
-
KLARK TEKNIK MIC BOOSTER CM-1 Dynamic Microphone Booster with High-Quality Preamp
Rp814.000Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-1 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package.
Dynamic mic booster adds extra gain to your sound
High-quality preamp provides up to +25 dB of gain
Phantom powered with no need for external power supply
Works with almost any dynamic or passive ribbon microphone
Rugged, road-worthy construction for years of dependable use
1-Year Warranty Program*
Designed and engineered in the U.K.